Physical properties and structural characteristics of particulate matter emitted from a diesel engine fueled with biodiesel blends.

This research explores the influence of renewable fuels, including three kinds of biodiesel along with ethanol on the physical properties and structural characteristics of particulate matter (PM) emitted from a diesel engine in comparison with pure diesel. After adding 10 vol% of grape seed biodiesel, coffee biodiesel and eucalyptus oil into diesel, three biodiesel blended fuels (10% grape seed biodiesel (DGs10), 10% spent coffee ground biodiesel (DC10) and eucalyptus oil biodiesel (DEu10)) were produced and tested in this study. Besides, one ethanol blend containing 9 vol% of ethanol and 1 vol% of biodiesel (blend stabilizer) was also tested to do the comparison. In the present study, scanning transmission electron microscope (STEM) and scanning electron microscope (SEM) were employed for analyzing the microstructure, nanostructure and electron diffraction pattern of PM. Raman spectrometer (RS) was also used for the analysis of structural characterization of PM. In addition, several experimental instruments like microbalance, measuring cup, viscometer, oxygen bomb calorimeter and Gas Chromatography-Mass Spectrometer (GC-MS) were employed to detect the fuel properties, including density, heating value, viscosity, composition and cetane number. A conclusion can be drawn that both biodiesel blends and ethanol blend have a changing effect on the PM properties compared to pure diesel, where biodiesel blends have a slightly weaker influence than ethanol blend. Regarding the biodiesel blends, DGs10 has more impact than DC10 and DEu10 in changes of PM properties, particularly in the reduction of PM mass, making it a good candidate for renewable fuel for diesel engines.

Physical, chemical, and cell toxicity properties of mature/aged particulate matter (PM) trapped in a diesel particulate filter (DPF) along with the results from freshly produced PM of a diesel engine.

The lifetime and efficiency of diesel particulate filters (DPFs) strongly depend on the proper and periodic cleaning and servicing. Unfortunately, in some cases, inappropriate methods are applied to clean the DPFs, e.g., using air compressors without proper disposal procedures which can have negative impacts on human health, the environment, and DPF's efficiency. However, there is no information available about the properties of this kind of PM. This research is therefore presented to explore the physicochemical and toxicity properties of aged PM trapped in a DPF (using compressed air for PM sampling) employing STEM, SEM, EDS, Organic Carbon Analyzer, TGA/DSC, and Raman Spectrometer for investigating the physicochemical properties, and assays of cell viability, cellular reactive oxygen species (ROS), interleukin-6, and tumor necrosis factor-alpha (TNF-α) for investigating the toxicity properties. Also, analyses from fresh PM samples from the diesel vehicle at two engine speeds are presented. It is found that at a certain/fixed PM number/mass for all three samples tested, the PM from DPF compared with the fresh PM can have both positive (particularly having the lowest water-soluble total carbon ratio) and negative impacts on human health (particularly having the highest cell death rate of 13.4%, ROS, and TNF-α) and the environment.

Physicochemical and cell toxicity properties of particulate matter (PM) from a diesel vehicle fueled with diesel, spent coffee ground biodiesel, and ethanol.

The literature shows that information about the physical, chemical, and cell toxicity properties of particulate matter (PM) from diesel vehicles is not rich as the existence of a remarkable number of studies about the combustion, performance, and emissions of diesel vehicles using renewable liquid fuels, particularly biodiesels and alcohols. Also, the PM analyses from combustion of spent coffee ground biodiesel have not been comprehensively explored. Therefore, this research is presented. Pure diesel, 90% diesel + 10% biodiesel, and 90% diesel + 9% ethanol + 1% biodiesel, volume bases, were tested under a fast idle condition. STEM, SEM, EDS, Organic Carbon Analyzer, TGA/DSC, and Raman Spectrometer were employed for investigating the PM physical and chemical properties, and assays of cell viability, cellular reactive oxygen species, interleukin-6, and tumor necrosis factor-alpha were examined for investigating the PM cell toxicity properties. It is found that the application of both biodiesel and ethanol has the potential to change the PM properties, while the impact of ethanol is more than biodiesel on the changes. Regarding the important aspects, biodiesel can be effective for better human health (due to a decrease in cell death (-60.8%)) as well as good diesel particulate filter efficiency (due to lower activation energy (-7.6%) and frequency factor (-83.2%)). However, despite a higher impact of ethanol on the reductions in activation energy (-24.8%) and frequency factor (-99.0%), this fuel causes an increase in cell death (84.1%). Therefore, biodiesel can be an appropriate fuel to have a positive impact on human health, the environment, and emissions catalysts performance, simultaneously.